Jabsco Self Priming Sealed Macerator Pump 24V

Discontinued - There may be a replacement item available, please call us 877-999-3699
SALE!

Jabsco Self Priming Sealed Macerator Pump 24V

Discontinued - There may be a replacement item available, please call us 877-999-3699

Run-Dry Macerator Waste Pump

WASTE EVACUATION

The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding... Read More...

SKU: #28421632859154 | Model: #18590-2094

Run-Dry Macerator Waste Pump

WASTE EVACUATION

The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation

It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.

FISH BOX AND LIVEWELL TANK EVACUATION

The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.

Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.

  • Triple sealed motor to prevent both internal and external motor corrosion
  • New Four-bladed chopper reduces clogging
  • Detects the absence of fluid then shuts-off pump before impeller is damaged
  • Sensor provides adequate run-dry period to allow initial priming of the pump
  • Interrupting power supply to the macerator resets the Run-Dry Device
  • Flow rate to 12 gpm
  • Self-priming to 4ft


Fitting:
Inlet Port: 1-1/2" Hose Barb plus 1-1/2 NPT
Discharge Port: 1" Hose Barb

WarningWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

  • SKU: #28421632859154
  • Weight: 5.25 lbs
  • Brand: Jabsco
  • Model: 18590-2094
  • Shipping Dimensions: 4.00" x 13.00" x 5.00"

RETURN POLICY


Last updated February 08, 2021


Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, you may return it to us for store credit only. Please see below for more information on our return policy.

RETURNS

All returns must be postmarked within two (2) days of the purchase date. All returned items must be in new and unused condition, with all original tags and labels attached.

RETURN PROCESS

To return an item, please email customer service at customerservice@marinemaster.com to obtain a Return Merchandise Authorization (RMA) number. After receiving a RMA number, place the item securely in its original packaging and the return form provided, and mail your return to the following address:

marinemaster.com
Attn: Returns
RMA #
397 Union Avenue  
Laconia, NH 03246  
United States  

Please note, you will be responsible for all return shipping charges. We strongly recommend that you use a trackable method to mail your return. 

REFUNDS

After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least fourteen (14) days from the receipt of your item to process your return.

EXCEPTIONS    

The following items cannot be returned:
  • special order 
  • clearance 
 
For defective or damaged products, please contact us at the customer service number below to arrange a refund or exchange. 
 
Please Note
   
  • A 30% restocking fee will be charged for all returns.
  • Sale items are FINAL SALE and cannot be returned.
  • returned items must be unopened, unused, undamaged, in original packaging

QUESTIONS

If you have any questions concerning our return policy, please contact us at:
6035564422